Product Description?
Falcon S-520 The mold descaling agent is formulated with high-quality solvents and surfactants.
?
Recommended Applications
It is suitable for removing plastic or rubber resin residues left on the mold during molding and softening and removing paint.
?
Product advantages?
● Free of chlorine, benzene and n-hexane, it is a green, environmentally friendly and harmless product, which can effectively prevent the occurrence of occupational diseases;
● Excellent descaling ability, good compatibility with most plastics;
● The volatilization speed is fast and the volatilization is clean;
● Good safety performance, the deformation and bursting pressure of the spray can are higher than the national standard;
● The manufacturer has passed the SGS IECQ HSPM QC080000 Environmental Hazardous Substance Process Management System certification, which can effectively ensure that the products comply with ROHS environmental protection directives and PAHS and PFOS testing from beginning to end.
?
Instructions
When removing mold scum, spray this agent on the scum and leave it to soak for a few minutes, then wipe with a soft cloth, or follow the usual operation for three consecutive times to completely remove the scum.
?
Product?Storage?
● All canned products are flammable, and the storage temperature should be below 50 ℃.
● For long-term storage, the stack height of cartons should not exceed 8 cartons.
● Handle the product with care, and do not use dangerous actions such as dropping, throwing, or bumping.
● The storage place should be ventilated, dry and cool. Direct sunlight or outdoor exposure is strictly prohibited.
● Do not knock and keep away from fire.
● Do not put it upside down.
?
Typical data
|
Test Items |
Test Method |
Unit |
Test result |
|
Density@15℃ |
ASTM D1298 |
g∕ml |
0.89 |
|
Appearance |
BAM 300 |
/ |
Colorless transparent |
|
Aromatic content |
/ |
% |
﹤1.0 |
|
Benzene |
/ |
mg/kg |
﹤1.0 |
|
Toluene |
/ |
mg/kg |
﹤1.0 |
|
N-ethane |
/ |
mg/kg |
﹤1.0 |
|
Halogenated hydrocarbon |
/ |
mg/kg |
No detection |
|
Internal pressure |
GB/T14449 |
MPa |
≤0.8 |
|
Ejection rate |
GB/T14449 |
% |
≥98 |
?
The above is typical data and does not represent product specifications. With the continuous updating of additives and the continuous emergence of new products, the above information may be changed at any time without notice. This data is for reference only.
